Stihl HT 100 User Manual

HT 100, HT 101, HT 130, HT 131
English
42
Anti-vibration elements (rubber buffers,
springs)
Check XXX
Have replaced by servicing dealer
1)
X
Chain lubrication Check X
Chain
Inspect, also check sharpness XX
Check chain tension XX
Sharpen X
Guide bar
Check (wear, damage) X
Clean and turn over XX
Deburr X
Replace XX
Chain sprocket
Check X
Have replaced by servicing dealer
1)
X
Safety labels Replace X
1)
STIHL recommends an authorized STIHL servicing dealer.
2)
CARB licensed engines only
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged as required

Stihl HT 100 Specifications

General

Brand	Stihl
Model	HT 100
Category	Pole Saw
Language	English