To Next PageTo Next Page
Need help?Do you have a question about the Stihl HT 56 C and is the answer not in the manual?
General| Engine Power | 0.8 kW (1.1 hp) |
|---|---|
| Displacement | 27.2 cm³ |
| Overall Length | 280 cm |
| Chain Type | Picco Micro 3 (PM3) |
| Guide Bar Length | 25 cm |
| Power Source | Gas |
| Fuel Capacity | 340 cc (11.5 oz.) |
Operator's physical/mental state, fatigue, and appropriate attire (gloves, hard hat, sturdy clothing) for safe use.
Ensures eye safety with goggles/face shield, hearing protection, and proper footwear for stable operation.
Explains pictograms, symbols in text, and how procedures are presented for clarity.
Notes that product improvements may not be covered in the current manual.
Details safe methods for transporting the unit and instructions for refueling.
Covers general guidelines for using the power tool safely and effectively.
Instructions on how to properly hold and control the pole pruner for stability.
Advice on operating in slippery ground, uneven terrain, and adverse weather conditions.
Covers cutting techniques, avoiding obstacles, and using accessories like the 30° angle drive.
Steps for assembling the unit and connecting the drive tube securely.
Guidance on removing the sprocket cover and fitting the bar and chain correctly.
Details on how to tension the chain initially and during use for optimal performance.
Procedures for verifying the chain tension is correct for safe operation.
Information on fuel types, mix ratios, and recommendations for fuel storage.
Steps for preparing for fueling, including cleaning the cap and opening it.
Instructions for closing the fuel cap, checking for proper closure and alignment.
Steps for opening and closing the threaded fuel filler cap.
Guidance on using chain lubricant and filling the oil tank for proper lubrication.
Ensures proper chain lubrication by checking oil throw-off and tank level.
Instructions for putting on and adjusting the shoulder strap for proper fit.
Overview of controls, stop switch function, and Easy2Start system.
Detailed steps for starting the engine in cold and warm conditions.
Guidance on cranking the engine and troubleshooting common starting issues.
Steps for disconnecting and connecting the drive tube for transport and storage.
Covers break-in period, frequent chain tension checks, and operating tips for longevity.
Steps for maintaining the guide bar, including cleaning, turning, and checking groove depth.
Procedures for cleaning or replacing the air filter to maintain engine performance.
Information on how engine parameters control exhaust emissions.
Instructions for adjusting idle speed and notes on factory carburetor settings.
Steps for removing and checking the spark plug for proper engine function.
Procedures for installing and checking the spark plug, including gap and connection.
Tips for prolonging the wear life of the starter rope and replacing damaged starters.
Guidelines for storing the unit for short and long periods, including fuel tank draining.
How to check for sprocket wear and when to replace it for optimal chain performance.
Details on chain pitch, filing angles, and using a file holder for sharpening.
Instructions on lowering depth gauges and using sharpening tools like gauges.
Procedure for lowering depth gauges to ensure correct cutting depth.
List of recommended sharpening tools and accessories for chain maintenance.
Procedure for checking the spark arresting screen in the muffler for performance issues.
Diagram identifying all major parts of the pole pruner with corresponding numbers and labels.
Detailed technical specifications for the engine, fuel system, and ignition.
Data on guide bars, saw chains, and sprockets, including pitch and groove width.
Information on available accessories and recommendations for maintenance and repairs.
Instructions on how to dispose of the product and accessories according to environmental regulations.
Details on the user's warranty rights, manufacturer's coverage, and owner responsibilities.
