To Next PageTo Next Page
Need help?Do you have a question about the Stihl HT 105 and is the answer not in the manual?
General| Power Output | 1.05 kW |
|---|---|
| Guide Bar Length | 30 cm |
| Power Source | Gasoline |
| Chain Gauge | 1.3 mm |
| Engine Displacement | 31.4 cc |
| Shaft Length | 270 cm |
Details requirements for the operator's physical and mental condition, including fatigue and health.
Important safety guidelines for refueling the machine to prevent fire and injury.
Discusses correct idle adjustment and chain tension for safe operation.
Proper hand placement and grip for controlling the unit during operation.
General operating tips, including checking chain tension and cold chain tension.
Benefits of a sharp chain and risks of using a dull one.
Explains common reactive forces like kickback, pushback, and pull-in.
Describes kickback and how to avoid it by being aware of the guide bar nose.
Provides specific steps to prevent kickback situations.
Explains pull-in and how to avoid it by maintaining full chain speed.
Describes pushback and how to avoid it by being alert to pinching situations.
Steps to take before using the unit, including protective clothing and adjustments.
Guidance on how to cut branches efficiently, starting with lower ones.
How to hold and control the unit for optimal cutting.
Step-by-step guide for attaching the gearbox to the drive tube.
Instructions for assembling the motor housing to the drive tube and control handle.
Steps for fitting the saw chain onto the guide bar and sprocket.
Details on the correct fuel mixture, octane rating, and ethanol content for the engine.
Instructions for safely refueling the machine, avoiding spills and overfilling.
Detailed steps for starting the engine, including using the choke and fuel pump.
