Stihl HT 100 User Manual

HT 100, HT 101, HT 130, HT 131
English
46
Cutting attachments
Rollomatic E Mini guide bars
Actual cutting length will be less than
listed bar length.
Rollomatic E Mini Light guide bars
Actual cutting length will be less than
listed bar length.
Rollomatic E guide bars
Actual cutting length will be less than
listed bar length.
Saw chain 3/8" P
Saw chain 1/4" P
Chain sprocket
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
Contact your STIHL dealer for
information regarding special
accessories that may be available for
your product.
Reduced kickback STIHL guide bars
(with green label)
Bar lengths: 30 cm (12 in.)
Pitch: 3/8" P (9.32 mm)
Groove width: 1.1 mm (0.043 in)
Reduced kickback STIHL guide bars
(with green label)
Bar lengths: 25, 30 cm (10, 12 in.)
Pitch: 1/4" P (9.32 mm)
Groove width: 1.1 mm (0.043 in)
Reduced kickback STIHL guide bars
(with green label)
Bar lengths: 25, 30 cm (10, 12 in.)
Pitch: 3/8" P (9.32 mm)
Groove width: 1.1 mm (0.043 in)
Reduced kickback STIHL guide bars
(with green label)
Bar lengths: 30 cm (12 in.)
Pitch: 3/8" P (9.32 mm)
Groove width: 1.3 mm (0.050 in)
Low kickback STIHL saw chain (with
green label)
Picco Micro Mini 3 (61 PMM3) Series
3610
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 1.1 mm (0.043 in)
Low kickback STIHL saw chain (with
green label)
Picco Duro (63 PD3) Type 3612
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 1.3 mm (0.050 in)
Low kickback STIHL saw chain (with
green label)
Picco Micro (71 PM3) Type 3670
Pitch: 1/4" P (6.35 mm)
Drive link gauge: 0.043" (1.1 mm)
7-tooth for 3/8" (rim sprocket)
Special Accessories

Stihl HT 100 Specifications

General

Brand	Stihl
Model	HT 100
Category	Pole Saw
Language	English