Stihl HT 250 User Manual

HT 250
English
36
Chain
Inspect, also check sharpness XX
Check chain tension XX
Sharpen X
Guide bar
Check (wear, damage) X
Clean and turn over XX
Deburr X
Replace XX
Chain sprocket
Check X
Have replaced by servicing dealer
1)
X
Drive shaft
Have STIHL multipurpose grease
replenished every 25 hours of operation
by servicing dealer
1)
Safety labels Replace X
1)
STIHL recommends an authorized STIHL servicing dealer.
2)
not in all versions, market-specific
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged as required

Stihl HT 250 Specifications

General

Brand	Stihl
Model	HT 250
Category	Pole Saw
Language	English