KG 550, KG 770
English
25
KG 770 – Pushbar
Removing
N Standing in front of the machine –
align the pushbar at an angle of 45°
to the ground (align arrows on the
housing with the ridge of the holder)
N push both holders slightly apart and
at the same time remove from both
machine mounts
Fitting
N Stand between the pushbar and
grip both holders with your hands
N Push holders slightly apart
N Push holder at the same time into
both mounts of the machine – the
pegs on the holders fit into the
recesses of the mounts
N Tilt the pushbar down – the holders
lock in the mounts and are securely
connected to the machine
To Next Page
Loading...
