KG 550, KG 770
English
26
Adjusting the height of the circular
brushes
The height adjustment is used to adapt
the circular brushes to the surface to be
swept.
N Turn knob to the left or right to the
required level:
The bristles of the circular brushes must
only make slight contact with the ground.
Too much surface pressure does not
achieve better cleaning results but
increases the wear.
Lateral guide roller
The lateral guide roller makes it easier to
guide the machine around the edges,
e. g. along walls or kerb stones.
KG 770 – Downholder
When cleaning around the edges, e. g.
along walls or kerb stones, the bristles
are guided close to the ground by
pressing down the downholder.
N Press downholder handle down
Working
Level Application
1 - 2 for level surfaces
3 - 4 wet leaves, sand, uneven
surfaces, e. g. pebble-
dashed concrete
5 - 8 Readjustment depending on
wear of bristles
To Next Page
Loading...
