EasyManuals Logo

Stihl KM 55 R User Manual

Stihl KM 55 R
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
KM 55 R, KM 55 RC
English
23
Definitions
1. Fuel Pump
Provides additional fuel feed for a
cold start.
2. Carburetor Adjusting Screws
For tuning the carburetor.
3. Spark Plug Boot
Connects the spark plug with the
ignition lead.
4. Starter Grip
The grip of the pull starter, for
starting the engine.
5. Muffler with Spark Arresting
Screen
Muffler reduces exhaust noises and
diverts exhaust gases away from
operator. Spark arresting screen is
designed to reduce the risk of fire.
6. Stop Switch
Switches the engine's ignition off
and stops the engine.
7. Throttle Trigger
Controls the speed of the engine.
8. Throttle Trigger Lockout
Must be depressed before the
throttle trigger can be activated.
9. Choke Lever
Eases engine starting by enriching
mixture.
10. Air Filter Cover
Covers and protects the air filter
element.
11. Fuel Tank
For fuel and oil mixture.
12. Fuel Filler Cap
For closing the fuel tank.
13. Machine Support
For resting machine on the ground.
14. Loop Handle with Barrier Bar
For easy control of machine during
cutting work.
15. Barrier Bar
Helps keep user's feet and legs
clear of the cutting attachment.
16. Drive Tube
Encloses and protects the drive
shaft between the engine and
coupling sleeve.
17. Coupling Sleeve
Connects drive tube to lower part of
drive tube (stub shaft).
18. Wing Screw
Locks handlebar in selected
position.
EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
CARB
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Engine
Single cylinder two-stroke engine
Specifications
A = 300 hours
B = 125 hours
C = 50 hours
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Displacement: 1.66 cu. in.
(27.2 cm
3
)
Bore: 1.34in. (34mm)
Stroke: 1.18 in. (30 mm)
Engine power to
ISO 8893:
1.0HP (0.75kW)
at 7,000 rpm
Idle speed: 2,800 rpm
Cut-off speed (rated): 9,500 rpm

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl KM 55 R and is the answer not in the manual?

Stihl KM 55 R Specifications

General IconGeneral
Engine Type2-stroke
Displacement27.2 cc
Weight4.4 kg
Weight (lbs)9.7 lbs
Engine Power0.8 kW / 1.1 hp

Related product manuals