EasyManua.ls Logo

Stihl KM 55 - Specifications

Stihl KM 55
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
English / USA
KM 55
Engine
EPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category A = 300 hours, B = 125 hours,
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB Air Index Label indicates
the terms:
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Ignition System
Type: Electronic magneto ignition
Fuel System
Carburetor: All position diaphragm
carburetor with integral fuel pump
Weight
Standard versions
dry, without CombiTool
1)
Version with bike handle
2)
Version with catalytic converter
R Version with loop handle
Versions with ErgoStart
dry, without CombiTool
1)
Version with bike handle
2)
Version with catalytic converter
R Version with loop handle
Single cylinder two-stroke engine
Displacement: 1.66 cu.in
(27.2 cm
3
)
Bore: 1.34 in (34 mm)
Stroke: 1.18 in (30 mm)
Engine power to
ISO 8893: 1 bhp (0.75 kW)
Idle speed: 2,800 rpm
Max. engine speed: 9,500 rpm
Specifications
Spark plug
(resistor type):
Bosch WSR 6 F,
NGK BPMR 7 A
Electrode gap: 0.02 in (0.5 mm)
Spark plug thread: M 14 x 1.25;
0.37 in lang
(9.5 mm)
Air filter: Felt element
Fuel tank capacity: 0.7 US.pt (0.33 l)
Fuel mix: see chapter
“Fuel“
KM 55
1)
9.3 lbs (4.2 kg)
KM 55 R 8.8 lbs (4.0 kg)
KM 55 C
1) 2)
9.5 lbs (4.3 kg)
KM 55 R
2)
9.0 lbs (4.1 kg)
KM 55 C
1)
9.7 lb (4.4 kg)
KM 55 RC 9.3 lb (4.2 kg)
KM 55 C
1)
2)
9.9 lb (4.5 kg)
KM 55 RC
2)
9.5 lb (4.3 kg)

Related product manuals