Stihl KW - Fitting the Harness; Shoulder Strap Adjustment; Attaching Machine to Harness; Balancing the Machine

15KW
English / USA
Shoulder Strap
: Put on the shoulder strap (1).
: Adjust length of strap until the spring
hook (2) is about a hand’s width
below your right hip.
: Balance the PowerSweep –
see "Balancing the Machine".
* See "Guide to Using this Manual"
Attaching Machine to Harness*
: Attach the spring hook (1) to the
clamp* (2).
* See "Guide to Using this Manual"
: Loosen the screw (3).
Balancing the Machine
: Slide the clamp up or down the drive
tube so that the sweeper belts touch
the ground.
: Tighten the screw firmly.
Fitting the Harness* Balancing the Machine
11
002BA150 KN
2
2
3
002BA151 KN
223BA013 KN