Stihl MS 182 - Spare Parts and Accessories; Disposal; EC Declaration of Conformity

Pitch Drive link
gauge/groove
width
Length Guide bar Number of
teeth,
sprocket
nose
Number of
drive links
Saw chain
35 cm
Rollomatic E /
Light 04
(type 3616)
63 PD3 (type
3612)
50
Rollo‐
matic E Light /
Light P04
40 cm
Rollomatic E /
Light 04
55
Rollo‐
matic E Light /
Light P04
45 cm
Rollomatic E /
Light 04
61
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. The actual
cutting length of a guide bar may be less than the specified length.
21 Spare Parts and Accesso‐
ries
21.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
22 Disposal
22.1 Disposing of Chainsaw
Contact the local authorities or your STIHL
dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
23 EC Declaration of Con‐
formity
23.1 STIHL MS 182, MS 212 Chain‐
saw
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declares under our sole responsibility that
–
Category: chainsaw
–
Manufacturer's brand: STIHL
–
type: MS 182, serial identification: 1148
–
Displacement: 35.8 cm³
–
type: MS 212, serial identification: 1148
–
Displacement: 38.6 cm³
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and manu‐
factured in compliance with the following stand‐
ards in the versions valid on the date of produc‐
tion: EN ISO 11681‑1, EN 55012 and
EN 61000‑6‑1.
The EC type examination pursuant to Directive
2006/42/EC Art. 12.3(b) was carried out by
DPLF, Deutsche Prüf- und Zertifizierungsstelle
für Land- und Forsttechnik GbR (NB 0363),
Spremberger Straße 1, 64823 Groß‑Umstadt,
Germany
–
Certification number:
–
MS 182: K-EG-2019/9436
–
MS 212: K-EG-2019/9438
The measured and guaranteed sound power lev‐
els were determined according to Directive
21 Spare Parts and Accessories English
0458-221-0121-B 31