Need help?Do you have a question about the Stihl MS 193 T and is the answer not in the manual?
General| Engine Power | 1.3 kW |
|---|---|
| Displacement | 30.1 cm³ |
| Weight | 3.3 kg |
| Power output | 1.3 kW |
| Guide bar length (recommended) | 30-35 cm |
| Chain Oil Capacity | 220 cc |
| Fuel tank volume | 270 cc |
| Oil tank volume | 220 cc |
| Chain pitch | 3/8" |
Explains symbols shown on the machine and in the manual.
Covers general safety, intended use, and protective gear.
Safe methods for moving and refuelling the chainsaw.
Procedures for cleaning the machine and information on accessories.
Steps for checks before starting and safely starting the saw.
Focuses on safe handling and preventing accidents/injuries.
Covers chain lubrication, vibration effects, and maintenance.
Explains kickback and its associated dangers.
Details kickback, pull-in, pushback, and how to prevent them.
Safe and effective methods for cutting with the chainsaw.
Information on the chain scabbard and its compatibility.
Covers disengaging brake, removing cover, mounting bar and chain.
How to check and adjust chain tension.
Details on the correct fuel/oil mixture and safe handling.
Steps for safely preparing and filling the fuel tank.
Information on selecting and using chain lubricants.
Steps for preparing and filling the chain oil tank.
How to check if the saw chain is properly lubricated.
Procedures for locking and disengaging the chain brake.
Explains lever positions and choke use for starting.
Detailed procedures for starting and stopping the engine.
Proper way to hold the saw and crank to start.
Troubleshooting engine starting problems and stopping procedures.
Guidelines for break-in, work practices, and chain tension.
Procedures for maintaining the guide bar and checking wear.
Information on filter types and how to clean them.
Procedures for adjusting the carburetor and idle speed.
Procedures for checking/cleaning the screen and servicing the spark plug.
Guidelines for storing the machine for short and long periods.
Procedures for checking, removing, and replacing the chain sprocket.
How to maintain the chain and perform sharpening.
A schedule of maintenance tasks and their recommended intervals.
Continues the schedule of maintenance tasks and intervals.
Diagram identifying the main parts of the chainsaw.
Technical specifications for engine, fuel, and oil systems.
Details on chain pitch, bar lengths, and other cutting attachments.
Information on ordering replacement parts using model and part numbers.
Recommendations for authorized servicing and quality parts.
Guidelines for environmentally friendly product disposal.
Essential safety instructions for operating the chainsaw.
Explains the meaning of various symbols used in the manual and on the machine.
Outlines owner's warranty rights, obligations, and STIHL's coverage.
Defines CSA classes and kickback angle requirements.
To Next Page
