To Next PageTo Next Page
Need help?Do you have a question about the Stihl MS 192 T and is the answer not in the manual?
General| Engine Displacement | 30.1 cc |
|---|---|
| Recommended bar length | 30 cm |
| Engine Power | 1.3 kW |
| Guide Bar Length | 30-35 cm |
| Fuel Capacity | 0.27 liters |
| Chain Oil Capacity | 0.22 liters |
| Chain pitch | 3/8" |
Explains symbols used in the manual.
Describes how steps or procedures are marked.
Mentions model variations and optional accessories.
Details how to avoid kickback and maintain control.
Covers general safety measures for chainsaw operation.
Warns about dangers of reactive forces, kickback, and chain speed.
Stresses importance of operator's physical and mental state.
Warns about vibration-related health issues like whitefinger disease.
Provides instructions for safe operation and use of the saw.
Provides instructions for safely carrying the chainsaw.
Refers to the chapter on fuel for proper usage.
Advises on securing the fuel cap and preventing spills.
Mentions engaging the chain brake before starting.
Warns about incorrect idle speed and emphasizes chain tension importance.
Details environmental conditions for safe operation.
Alerts about poisonous exhaust gases and need for ventilation.
Warns about chemicals in dust, mists, and fumes causing health issues.
Alerts to the dangers of asbestos dust and proper handling.
Stresses clearing the work area and advises caution in adverse weather.
Advises extreme caution when cutting near power lines.
Warns against one-handed operation to prevent serious injury.
Warns about using the starting throttle lock and touching hot engine parts.
Restricts cutting to wood and warns against touching the chain.
Warns that reactive forces can be dangerous and cause injury.
Lists common reactive forces like kickback, pushback, pull-in.
Explains kickback occurrence when the chain contacts an object.
Outlines compliance requirements for chainsaw kickback standards.
Notes angle measurement differences and advises on specific cutting attachments.
Warns about potential kickback risks with certain bar/chain combinations.
Prohibits bow guides due to increased kickback risk.
Explains the chain brake system for reducing kickback injury.
Stresses the necessity of the front hand guard, proper brake function, and maintenance.
Notes reduced effectiveness with aggressive chains.
Explains how a dull chain negates anti-kickback features and that features don't prevent kickback.
Emphasizes avoiding kickback situations as the primary protection.
Warns about pull-in risk and provides prevention methods.
Warns about pushback risk and provides prevention methods.
Highlights increased injury risk due to top handle design and reactive forces.
Warns about the danger of cutting tensioned limbs.
Warns about stopping the engine, ignition testing, and spark plug safety.
Warns about muffler condition and chain brake maintenance.
Explains chain compatibility and provides installation steps.
Advises on fuel mix shelf life, proper mixing, and handling precautions.
Warns against using waste oil due to health and environmental risks.
Lists situations for engaging the brake and describes its release.
Explains how to test the chain brake functionality.
Outlines maintenance intervals for the chain brake.
Specifies maintenance frequency based on user type.
Instructions for starting the engine, including cold and warm states.
Details choke lever positions for cold and warm engine starts.
Details starting procedure for standard starters.
Explains starting procedure for Easy2Start systems.
Instructions for cold and warm engine firing.
Instructions for disengaging brake and checking lubrication.
Steps for starting after refueling a dry tank.
Steps for addressing a flooded engine.
Details requirements for the initial break-in period of a new machine.
Emphasizes frequent chain tension checks and adjustments.
Explains correct chain tension for cold and hot conditions.
Advises slackening chain after use to prevent damage.
Instructions for storing the saw for brief periods.
Instructions for storing the saw for extended periods.
Details bar inspection, cleaning, turning, and when to replace.
Describes available filter types for different conditions.
Steps for cleaning the filter when engine power is lost.
Instructions for washing and drying heavily soiled filters.
Details the factory standard setting for the carburetor.
Procedures for adjusting idle when the engine stops.
Procedures for adjusting idle when the chain rotates.
Procedures for addressing erratic idling and poor acceleration.
Adjustments for optimal performance at high altitudes.
Advises on correct spark plug installation to prevent fire.
Instructions for replacing a broken starter rope.
Instructions for replacing the starter rope.
Specifies rope replacement for specific starter models.
Warns about spring tension during replacement and advises protective gear.
Instructions for storing the saw for brief periods.
Instructions for storing the saw for extended periods.
Steps for removing the chain sprocket.
Information on when and how to replace the chain sprocket.
Details the importance of proper sharpening, angles, and tools.
Covers chain sharpening angles, file selection, and cutter shapes.
Information about depth gauge purpose and adjustments.
Instructions for adjusting depth gauges after sharpening.
Preamble and note about maintenance intervals based on usage.
Details emission compliance periods and categories.
Defines terms used for California Air Resources Board emission index.
Provides technical details about the engine.
Lists recommended cutting attachments and related standards.
Information on user maintenance and authorized repair services.
Outlines the warranty rights and responsibilities of the owner.
Details the warranty coverage provided by the manufacturer.
Specifies the owner's responsibilities for maintaining warranty coverage.
Details STIHL's warranty coverage for the equipment.
Defines the start date and duration of the warranty period.
Outlines warranty rights and obligations for California emissions.
Details manufacturer's warranty coverage for California emissions.
Specifies owner's responsibilities for California emissions warranty.
Details STIHL's warranty coverage for California emissions.
Information on warranty repairs performed by STIHL.
Lists trademarks registered by STIHL.
Lists common law trademarks owned by STIHL.
