Stihl MS 192 T User Manual

32
English / USA
MS 192 T, MS 192 TC
At very low outside temperatures
Allow the engine to warm up.
As soon as the engine runs:
: Blip the throttle trigger to disengage
it from starting throttle position –
Master Control lever moves to run
position # and the engine settles
down to idling speed.
: Disengage chain brake:
Pull the hand toward the handlebar
as shown.
: Open throttle slightly – warm up
engine for short period.
To shut down the engine
: Move the Master Control lever to 0
or STOP.
.
If the engine doesn’t start
If fuel tank has been run dry and then
refueled
: After fueling, press the fuel pump
bulb at least five times – even if the
bulb is already filled with fuel.
Engine is flooded
If you did not move the choke lever to j
(warm start) quickly enough after the
engine began to fire, the combustion
chamber is flooded.
: Set the Master Control lever to 0 or
STOP.
: Open the lock (1) in the direction of
the arrow.
: Remove the filter cover (2).
: Engage a suitable tool in the spark
plug boot (3).
: Pry off the spark plug boot.

Stihl MS 192 T Specifications

General

Engine Displacement	30.1 cc
Recommended bar length	30 cm
Engine Power	1.3 kW
Guide Bar Length	30-35 cm
Fuel Capacity	0.27 liters
Chain Oil Capacity	0.22 liters
Chain pitch	3/8"