Stihl MS 192 T

29MS 192 T, MS 192 TC
English / USA
Starting the engine
Observe safety precautions – see
chapter on "Safety Precautions".
: Press the fuel pump bulb at least
five times – even if the bulb is
already filled with fuel.
: Push hand guard (1) forward:
The chain is now locked.
: Press down the trigger interlock (2)
and squeeze the throttle trigger (3)
at the same time – hold both levers
in that position.
: Move Master Control (4) to n and
hold it there.
: Now release the throttle trigger,
Master Control and trigger interlock
in that order. This is the starting
throttle position.
If engine is cold
: Set the choke lever (5) to l
If engine is warm
: Set the choke lever (5) to j.
Also use this position if the engine
has been running but is still cold.
Starting / Stopping
the Engine