Stihl MS 192 T User Manual

25MS 192 T, MS 192 TC
English / USA
Opening the cap
: Swing the grip 90° to the upright
position.
: Turn the cap counterclockwise
(about a quarter turn).
: Remove the filler cap.
Closing the cap
: Insert the cap in the opening – with
the grip upright – the marks must
line up.
: Turn cap clockwise as far as stop
(about a quarter turn).
: Fold the grip down so that it is flush
with the top of the cap.
If the grip does not lie completely flush
with the cap and the lug on the grip does
not engage the recess in the filler neck
(arrow), the cap is not properly seated
and tightened and you must repeat the
above steps.
Change the fuel pickup body
once every year
: Drain the fuel tank.
: Use a hook to pull the fuel pickup
body out of the tank and take it off
the hose.
: Push the new pickup body into the
hose.
: Place the pickup body in the tank.

Stihl MS 192 T Specifications

General

Engine Displacement	30.1 cc
Recommended bar length	30 cm
Engine Power	1.3 kW
Guide Bar Length	30-35 cm
Fuel Capacity	0.27 liters
Chain Oil Capacity	0.22 liters
Chain pitch	3/8"