Stihl MS 192 TC

MS 192 T, MS 192 TC
English
31
The air filter system can be adapted to
suit different operating conditions by
installing a choice of filters. Changing
the filter is quick and simple.
The saw comes standard with either a
fabric filter or a fleece filter.
Fabric filter
For normal operating conditions and
winter operation.
Fleece filter
For dry and very dusty work areas.
If there is a noticeable loss of engine
power
N Open the twist lock (1) in the
direction of the arrow.
N Remove the carburetor box
cover (2).
N Clean away loose dirt from around
the filter.
N Remove the filter.
N Knock the filter out on the palm of
your hand or blow it clear with
compressed air from the inside
outwards.
N Always replace damaged filters.
If filter is caked with dirt:
N Wash the sfilter with STIHL unversal
cleaner or in a clean, non-
flammable solution (e.g. warm
soapy water) and then dry.
N Place the filter (3) in position.
N Fit the carburetor box cover.
Air Filter System Cleaning the Air Filter
Do not clean a fleece filter (option)
with a brush.