Stihl MS 260 User Manual

60
English
MS 260
Engine
EPA / CEPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category:
A = 300 hours,
B = 125 hours,
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours,
Intermediate = 125 hours,
Moderate = 50 hours
Single cylinder two-stroke engine
Fuel System
Carburetor
All position diaphragm carburetor with
integral fuel pump
Air filter
Bisectional wire mesh flat filter
Fuel tank capacity
0,46 l (460 cm
3
)
Fuel mix
See chapter “Fuel”
Oil tank capacity
0,29 l (290 cm
3
)
Ignition System
Type
Electronic magneto ignition
Spark plug (suppressed)
Bosch WSR 6 F, NGK BPMR 7 A
Electrode gap
0,5 mm
Spark plug thread
M 14x1,25;
9,5 mm long
This spark ignition system meets all
requirements of the Canadian
Interference-Causing Equipment
Regulations ICES-002.
Rewind Starter
Starter rope
Ø 3,5x960 mm
Weight
without cutting attachment
Displacement: 50,2 cm
3
Bore: 44,7 mm
Stroke: 32 mm
Max. engine speed
with bar and chain: 14,000 rpm
Idle speed: 2,800 rpm
Engine power to
ISO 7293: 2,6 kW (3,5 HP)
Specifications
MS 260: 4,7 kg
MS 260 W 4,9 kg
MS 260 C/Kat 4,9 kg
MS 260 C/Kat W 5,2 kg

Stihl MS 260 Specifications

General

Engine Power	2.6 kW
Power output	3.5 bhp
Chain pitch	3/8"
Bar Length	40 cm
Fuel Capacity	460 ml
Oil Capacity	200 ml
Fuel tank volume	460 ml
Oil tank volume	200 ml