61MS 260
English
Cutting Attachment
Chain sprocket:
7-tooth for 0,325“ spur sprocket*
8-tooth for 0,325" rim sprocket*
Chain lubrication:
Fully automatic, speed-controlled oil
pump with rotary piston.
STIHL cutting attachments complying
with CSA Standard CAN 3-Z 62.3:
Guide bar:
STIHL Rollomatic
with sprocket nose (12 tooth)
40, 45, 50 cm (16, 18, 20 in)
Saw chain:
STIHL chain 23 RS, 23 RM, 23 RM2
(0,325“)
Drive link gauge: 1,6 mm (0,063 in)
Max. chain speed: 30,4 m/s
Other cutting attachments complying
with CSA Standard CAN 3-Z 62.3 are
available (see section CSA-Standard
Z 62.3 and “Chain Leaflet” inside chain
box or contact your local STIHL dealer).
Please ask your STIHL dealer to
properly match your powerhead with the
appropriate bar/chain combinations to
reduce the risk of kickback injury.
* depending on market
File holder with round file
Filing gauge
Reference gauges
STIHL lubricating grease
STIHL filler nozzle for STIHL
canisters
helps avoid spills and overfilling during
refueling.
Contact your STIHL dealer for more
information on these and other special
accessories.
Users of this unit should carry out only
the maintenance operations described
in this manual. Other repair work may be
performed only by authorized STIHL
service shops.
Warranty claims following repairs can be
accepted only if the repair has been
performed by an authorized STIHL
servicing dealer using original STIHL
replacement parts.
Original STlHL parts can be identified by
the STlHL part number, the
STIHl
logo and, in some cases, by the STlHL
parts symbol (. This symbol may
appear alone on small parts.
Special Accessories Maintenance and Repairs
To Next Page
Loading...
Need help?
General
