MS 261, MS 261 C
English
34
In the event of engine running problems,
first check that conditions for use of the
cover plate still apply.
Fitting the cover plate
N Place the cover plate (1) in position,
engage the two tabs (arrows), and
secure it with the screws (2).
Switching on the handle heating
(depending on model)
N Move the switch to F – move switch
back to 0 to switch off.
There is no risk of overheating during
long periods of operation. The heating
system is maintenance-free.
Positions of Master Control lever
Stop 0 – engine off – the ignition is
switched off.
Normal run position F – engine runs or
can fire.
Starting throttle
n – this position is
used to start a warm engine. The Master
Control lever moves to the normal run
position as soon as the throttle trigger is
squeezed.
Choke shutter closed l – this
position is used to start a cold engine.
Electric Handle Heating
Starting / Stopping the
Engine
To Next Page
Loading...
