Stihl MS441 C-M User Manual

MS 441 C-M
English
40
Fouled air filters will impair engine
performance, increase fuel consumption
and make the machine more difficult to
start.
N Move the Master Control lever to the
stop position 0
N Use a combination wrench to open
the clamps (1) in the direction of the
arrow
N Remove the carburetor box
cover (2)
N Unscrew the twist lock (3) in the
direction of the arrow
N Remover filter
If there is a noticeable loss of engine
power:
N Knock out the filter or blow it clear
with compressed air from the inside
outwards
If knocking-out or blowing-out does not
suffice, or in the case of stubborn dirt or
stuck filter fabric, the filter must be
subjected to a thorough cleaning.
Always replace a damaged filter.
Thorough filter cleaning
N Wash the filter in STIHL special-
purpose cleaner (special
accessory) or a clean, non-
flammable cleaning liquid (e.g.,
warm soapy water) – rinse the filter
from inside to out under a water jet
– do not use high-pressure cleaners
N Dry all filter parts – do not expose to
extreme heat
N Do not oil the filter
N Reinstall filter
Remove air filter Cleaning the Air Filter

Stihl MS441 C-M Specifications

General

Displacement	70.7 cc
Chain oil automatic adjustment	Yes
Vibration damping	Yes
Starter	STIHL ElastoStart
Engine Power	5.6 bhp
Guide Bar Lengths	40 to 71 cm (16 to 28 in.)
STIHL Oilomatic chain pitch	3/8"
Ignition system	Electronic
Fuel Capacity	24.5 oz
Chain Oil Capacity	12.2 oz