Stihl MS441 C-M User Manual

MS 441 C-M
English
50
Maintenance and Care
The following information applies under normal operating conditions. The specified intervals must be
shortened accordingly when working for longer than normal each day or under difficult conditions
(extensive dust, highly resinous lumber, lumber from tropical trees, etc.). If the machine is only used
occasionally, the intervals can be extended accordingly.
before starting work at the end of work and/or daily whenever tank is refilled weekly monthly yearly if faulty if damaged as required
Complete machine
visual inspection (condition, leaks) XX
clean X
Throttle trigger, throttle trigger lockout, master con-
trol lever
Checking operation XX
Chain brake
Checking operation XX
have checked by a specialist dealer
1)
X
Fuel pick-up body / filter in fuel tank
check X
clean, replace filter insert XX
replace XXX
Fuel tank clean X
Lubricating oil tank clean X
Chain lubrication check X
Saw chain
check, pay attention to sharpness XX
Check the chain tension XX
sharpen X
Guide bar
check (wear, damage) X
clean and turn over X
deburr X
replace XX
Chain sprocket check X
Air filter
clean XX
replace X
Antivibration elements
check XX
have them replaced by a specialist dealer
1)
X

Stihl MS441 C-M Specifications

General

Displacement	70.7 cc
Chain oil automatic adjustment	Yes
Vibration damping	Yes
Starter	STIHL ElastoStart
Engine Power	5.6 bhp
Guide Bar Lengths	40 to 71 cm (16 to 28 in.)
STIHL Oilomatic chain pitch	3/8"
Ignition system	Electronic
Fuel Capacity	24.5 oz
Chain Oil Capacity	12.2 oz