SE 122
English
8
Apply the brake on the caster to lock the
machine in a particular position.
Various accessory parts must be
mounted on the machines before
starting for the first time.
WARNING
Do not plug the power cord into the
outlet until the machine is completely
assembled.
N Release the spring catches (1)
N Lift the upper part of the vacuum
cleaner (2) vertically up and off
N Remove the accessories from the
container
N Push filter bag sleeve onto intake
port as far as possible (see
instructions on filter bag)
N Refit the upper part of the vacuum
cleaner (2) and close the spring
catches (1) – ensure that the
catches engage properly
N Push the suction hose into the
connector
N Push the hand tube (3) into the
sleeve of the suction hose
N Push extension tube (4) onto the
hand tube
Lock the machine in position
Assembling the Unit
To Next Page
Loading...
