SE 61
English
12
N Empty the container and clean the
machine
After vacuuming liquids:
N Remove the upper part of the
vacuum cleaner so that the filter
element can dry
N Roll up the power cord and hang it
on the holder
N Fasten the extension tube, suction
hose and accessories to the holders
provided for this purpose
N The vacuum cleaner must be stored
in a dry room and protected against
unauthorized use
N Switch off the vacuum cleaner
N Unplug the power plug from the
socket
N Release the spring catches (1)
N Lift the upper part of the vacuum
cleaner (2) vertically up and off
When dry-vacuuming without filter
bag and when wet-vacuuming
N Empty the container and dispose of
its contents in accordance with the
applicable regulations
N Continue with: Refit the upper part
of the vacuum cleaner
When dry-vacuuming with filter bag
N Pull filter bag sleeve off intake port
and seal filter bag sleeve with slide
N Carefully remove filter bag from
container and dispose of in
accordance with statutory
regulations
N Insert new filter bag (instructions on
filter bag)
N Push filter bag sleeve onto intake
port as far as possible
Refit the upper part of the vacuum
cleaner
N Clean the edge of the container
N Refit the upper part of the vacuum
cleaner
N Clean the sleeve and intake port
before fitting the suction hose
After Finishing Work Emptying the container
To Next Page
Loading...
