SE 61
English
13
N Close slide on hand tube
N Switch on machine
N Press the opening of the hand tube
firmly against the flat surface of the
upper part of the vacuum – this will
seal the opening of the hand tube
(as shown in the picture)
N Press the filter cleaning button 3
times
Dust deposits are removed from the filter
element.
N Unplug the power plug from the
socket
N Remove upper part of vacuum
cleaner and turn it over
N Turn the cover (1) in the direction of
the arrow and remove it
N Remove filter element (2) and
dispose of it in accordance with the
statutory regulations
N Check correct operation of the float:
the float must move easily when the
upper part of the vacuum cleaner is
turned over
N Fit new filter element in the reverse
sequence of steps
N Refit upper part of the vacuum
cleaner
Cleaning the filter element Replacing the filter element
Never use the vacuum cleaner
with a damaged filter element or
without the filter element.
To Next Page
Loading...
