SR 200
English
18
Other Hints on Starting
If the engine stops while the choke knob
in on g or during acceleration
N Move the choke knob to < and
continue cranking until the engine
runs.
If engine does not start
N Make sure all settings are correct
(choke knob, setting lever in run
position F).
N Repeat the starting procedure.
If fuel tank has been run completely dry
and then refueled
N Press the manual fuel pump bulb at
least five times – even if the bulb is
filled with fuel.
As soon as the engine runs
N Operate the throttle trigger.
N Choke knob automatically returns to
the run position F when the throttle
trigger is operated.
At very low outside temperatures
N Open throttle slightly – warm up the
engine for a short period.
Stopping the Engine
N Move the setting lever in the
direction of 0 – the engine stops –
the setting lever springs back to the
on position.
To Next Page
Loading...
