Stihl SR 400 - Page 24

•
Remove the three screws .
•
Lift the starter cover  off
the engine.
•
Remove the spring clip .
•
Remove the rope rotor with
washer  and pawl .
•
Ease the cap out of the starter
grip.
•
Remove remaining rope from the
rotor and grip.
•
Tie a simple overhand knot in the
end of the new starter rope -
1113 195 8200 - and then thread
the rope through the top of the grip
and the rope bush .
•
Refit the cap in the grip.
353BA041 KN
7
6
353BA027
1
1
1
2
5HSODFLQJ6WDUWHU5RSHDQG
5HZLQG6 SULQ J
