14 - English
4
INSTALLATION
Place the receiver into the top of the mounting bracket
with the flat side facing the ceiling. Tuck the receiver an-
tenna and all wiring up into the mounting bracket, making
sure the wires don’t become pinched.
Slide the canopy up into place and rotate clockwise to lock
to mounting bracket assembly. Reinstall the two screws
(M4 x 6 mm) removed previously and tighten securely.
Lift the screw cover ring up over the screws and twist
counterclockwise to secure in place.
CANOPY
SCREW
COVER RING
SCREWSSCREWS
CANOPY
SCREWS
CANOPY
SCREWS
MOUNTING
BRACKET
TOP VIEW
MOUNTING
BRACKET
RECEIVER
ANTENNA
TOP
SLIDES IN FROM THIS DIRECTION
To Next Page
Loading...