EasyManua.ls Logo

Still LTX 70 - Chassis, Bodywork and Fittings

Still LTX 70
186 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If Blue Q mode is activated and the operator
steps off the truck, the following functions are
deactivated:
Main beam lights are switched off The side-
lights remain lit
The heating is turned off
The rear defroster is switched off
The front windscreen wiper and the rear
window wiper are stopped
The seat heater is switched off
There is a five-second delay before the differ-
ent functions are switched off.
If the driver is driving in reverse travel at more
than 3 km/h, the front main beam lights and
the front windscreen wiper are switched off.
If the driver is driving in forward travel at more
than 3 km/h, the rear main beam lights and
the rear window wiper are switched off.
To deactivate Blue Q mode, proceed as fol-
lows:
Press the Blue Q (1) button
Operating the drive programme se-
lection button
With the drive programme selection button (2),
or hare button, you can reduce the perform-
ance of the tow tractor or carrier.
Three different drive programmes are availa-
ble:
Standard mode 0: the tow tractor operates
normally
Speed reduction mode 1: with this mode,
you can reduce the speed of the tow tractor
With Downhill assistance mode 2 (lowering
assistance), you can reduce the speed of
the tow tractor when lowering
To select a drive programme, proceed as fol-
lows:
Press the drive programme selection but-
ton, hare button (2), several times until the
chosen programme appears on the display.
Use
4
Driving the tow tractor
571191 801 15 51 EN - 02/2021 - 10

Table of Contents

Related product manuals