Do you have a question about the Stobag MOVENO DSRC-E and is the answer not in the manual?
Details about the MOVENO DSRC-E series electric motors and their intended use.
Instructions for connecting the MOVENO DSRC-E motors to the power supply.
Procedure for changing the cable output direction on MOVENO-Z version.
Guidance for disconnecting and replacing the power supply cable.
Steps for memorizing the first and additional transmitters for the motor.
Procedure for programming the fully closed and fully open positions.
Additional functions and settings for the motor's operation.
How to program a partial opening position for the awning.
Setting the torque reduction for gentler closure and fabric protection.
Procedures for removing programmed positions or the RDC function.
Programming the fabric retraction function for a taught awning.
Procedure for changing the programmed 'open' position.
Steps for deleting all programmed transmitters and data.
Loading...