To Next PageTo Next Page
Need help?Do you have a question about the Stobag MOVENO Tandem DWIR-E and is the answer not in the manual?
Important safety instructions for personal safety and correct installation procedures.
Precautions for safe and correct product installation, handling, and power disconnection.
Safety guidelines for operating the automation, including child supervision and safe distance.
Overview of MOVENO Tandem motors, their intended use, automation capabilities, and specifications.
Checks before installation, system compatibility, motor torque, and roller diameter requirements.
Guidelines for assembling and installing tubular motors, referencing figures, catalogue, and selection guides.
Steps to change the cable outlet direction on the MOVENO Tandem Z version motor.
Instructions for replacing the power cable on MOVENO Tandem Y and Z motors with identical versions.
Guidance on positioning and installing the pushbutton control panel for the automation system.
Important precautions and wiring diagram for connecting motors, controls, and mains power.
Procedure to ensure correct association of UP/DOWN movements with respective control buttons.
General warnings and notes regarding programming procedures, time limits, and control units.
Instructions for programming limit switches "0" and "1" to define awning end positions.
Explanation of the RDC function for reducing motor traction torque during closing maneuvers.
Step-by-step manual procedure for programming awning limit positions "0" and "1".
Semi-automatic procedure for programming awning limit positions, recommended for awnings with boxes.
How to personalize the RDC function's force level after limit position programming.
Procedure to delete all data, including limit positions, from the control unit memory.
Information on the motor's maximum continuous work cycle and thermal cut-out function.
Troubleshooting steps for common issues like system not moving or starting, and error conditions.
General