Need help?Do you have a question about the Stober POSIDRIVE FDS 5008 and is the answer not in the manual?
General| Brand | Stober |
|---|---|
| Model | POSIDRIVE FDS 5008 |
| Category | Servo Drives |
| Language | English |
States technical documentation is part of the product and defines the inverter's intended operational purpose.
Discusses mandatory risk assessment and specifies qualifications for personnel handling the devices.
Outlines critical safety rules for installation, electrical connection, and commissioning processes.
Covers safety procedures for operating, servicing, and safely disposing of the inverter.
Details electrical specifications for specific inverter sizes (Size 0 and Size 1).
Guides on safely mounting the inverter within a control cabinet, including clearances and orientation.
Provides step-by-step instructions for installing the submounting brake resistor accessory.
Details the mechanical installation procedure for EMC shrouds and brake modules.
Guides on installing the LEA 5000 accessory for expanded I/O capabilities.
Instructions for installing CANopen, PROFIBUS, EtherCAT, or PROFINET accessories.
Details the terminal description and connection requirements for the 230 V/400 V power input.
Details the correct procedure for connecting the protective earth to the inverter housing.
Provides terminal descriptions and connection guidelines for motor phases and protective earth.
Explains the terminal description and usage of the ASP 5001 Safety Torque Off function.
Details terminal descriptions for connecting motor temperature sensors and holding brakes.
Details terminals for analog and binary signal inputs and outputs.
Provides specifications and terminal details for encoder interfaces.
Describes the X4 terminal specification for TTL and HTL incremental encoders.
Provides an overview of fieldbus communication options.
To Next Page
