Digital Water Timer
Art. 25027
and program proceeds further to set CYCLE TIME
automatically.
Example:
If given RUN TIME is 50 min and MIST CYCLE is 20%
The timer waters for 10 minutes, stops 10 minutes,
then repeat.
Number of watering times = 100% ÷ 20% = 5 times
5 times x 10 min. = 50 minutes
Total irrigation time is: 5 times x 10 min + 4 stops x 10
min = 90 minutes
If given RUN TIME = 50 minutes, and
MIST CYCLE = 100%,
the timer waters for 50 minutes, then stops.
7. Set the CYCLE TIME
According to the pre-set value of RUN TIME and MIST
CYCLE, the program will calculate the minimum value
of CYCLE TIME automatically. If programmed value of
CYCLE TIME needs to be revised, press button Zone
1 to increase digital value (or press button Zone 2 to
decrease the digital value) until the selected value
is entered, press button Item to save the value. The
digital values are 1HR, 2HR, 3HR, 4HR, 6HR, 8HR, 12HR,
1 day, 2 DAY, 3 DAY, 4 DAY, 5 DAY, 6 DAY, 7 DAY. The
To Next Page
Loading...