Digital Water Timer
Art. 25027
CYCLE TIME is now set and program proceeds further
to set Watering Days mode.
Example of calculation of minimum CYCLE TIME:
If given RUN TIME = 100 min
MIST CYCLE = 30% (the timer waters for 30 mins, stops
10 mins, then repeat).
Number of watering times = 100 mins ÷ 30 mins x 30
mins and 10mins surplus (means min. watering times
is 4)
3 stops x 10 min + 100 mins (Total minutes of RUN
TIME+ MIST CYCLE)
130mins ÷ 60mins = 2 hours and 10 min. Rounding –off
as 3 hours.
So, CYCLE TIME is programmed as 3 HR automatically
8. Set the WATERING DAYS
The icon
is blinking on the left side of MO (Monday)
at the beginning. Press button Zone 1 to select the
watering days of the week, or press button Zone 2
to skip it. The icon will be stuck to the side of the
selected days of the week, when button Zone 1 is
pressed and then will be shown blinking on next day of
the week until each of 7 days has been gone through
one after another. Press Item to save the selected
To Next Page
Loading...