- 8 -
Technical Data
Machine Sound and Vibration
Measurements
Sound and Vibration Measurements
Sound Pressure Values as measured are per the following:
Noise 1 Model/Configuration
Sound Pressure 655PM
8hp Honda
Tow pole end
92dBA
Cowl end right side (exhaust)
98dBA
Cowl end back of unit
98dBA
Cowl end left side
94dBA
Sound Pressure measurements were taken with Simpson model 886-2 type 2 meter,
calibrated 2/21/97
Acceleration measurements were taken with Quest Tech model VI-100 meter, calibrated
4/17/96
Sound and vibration measurements obtained with machine operating at maximum.
Test date was 7/29/98 with test conditions at 23 degrees Celsius
\\mktg\stone1\netaldus\pm5\engr\bonnie\bln\sound_pm.doc
To Next Page
