- 11 -
Technical Data
Machine Sound and Vibration
Measurements
Sound Pressure Values as measured are per the following:
Model/Configuration
CS1
8 HP Honda
w/14 in blade
CS2
11 HP Honda
w/14 in blade
CSP3
18 HP Honda
w/20 in blade
at operator’s ear
88dBA 93dBA 91dBA
RMS acceleration on the handle were measured per the following:
meter/sec
2
13.16 23.4 18.0
Sound and vibration values have been taken in accordance to the EEC machine
regulation (edition 93/68/EEC)
Sound Pressure measurements were taken with Simpson model 886-2 type 2 meter,
calibrated 2/21/97
Acceleration measurements were taken with Quest Tech model VI-100 meter, calibrated
4/17/96
Sound and vibration measurements were obtained with machine operating at maximum
engine speed of 3200 RPM.
Units had blades mounted and measurements were taken out of cuts.
document in cs_rev e_2000.p65
To Next Page
Loading...
