51
Scope of delivery
HPM basic moisture measuring device, holster, operating
instructions, 2 x 1.5 V AA batteries.
Proper use
This HPM basic electronic moisture measuring device is
intended for determining the moisture (proportion) in wood,
plaster, brickwork and other building materials. A quick and
accurate measurement with corresponding characteristics can
be conducted on the basis of the conductivity/resistance mea-
surement. The device is intended for commercial applications
only; it must be used in accordance with the local conditions.
The device is designed for use in interior and exterior applica-
tions.
Technical data
Measurement as per DIN EN 13183-2
Measuring method Resistance measurement
Digital display of readings On the illuminated LCD display
featuring output tilt function
LCD display resolution 128 x 64 pixels
Housing ABS plastic
Measuring range in wood 5 to 80%, depending on the
selected wood type
Measurement rage in pla-
ster and brickwork
0 to 10% depending on the
selected building materials
Measuring accuracy +/- 1 %
Visual and acoustic war-
nings
In the event of excessive humidity
Operating temperature -20° C to +50° C
Storage temperature -20° C to +60° C
Protection class IP54
Power supply 2 x AA 1.5 V batteries
To Next Page
Loading...
