Store It Cold CoolBot PRO Quick Start Setup Guide

1 | P a g e
CoolBot Pro Quick Start Set Up Guide Rev 2020 – 01A UL ©2020 Store It Cold, LLC
CoolBot Pro
CoolBot Jumper
BOX CONTENTS
TECHNICAL DATA
BEFORE STARTING
• Should I read this guide? Yes! We highly recommend reading this “Step by Step” guide entirely to ensure proper installation.
We also encourage you to visit our support page www.storeitcold.com/support and read the detailed CoolBot Pro Manual.
• I don’t have Wi-Fi. No problem! You can still use the CoolBot Pro without the CoolBot Jumper and without a Wi-Fi connection
just like the previous generation CoolBot. If you have a window A/C, go straight to the “CONNECTING YOUR COOLBOT PRO TO
YOUR AIR CONDITIONER” Section of this Guide (page 3). NOTE: Your CoolBot Pro will keep your cooler cold but you won’t be
able to access online data or change settings from the CoolBot Pro App.
• I have Wi-Fi AND Internet connection. Awesome! Then you will enjoy all of the benefits the CoolBot Pro and its app. First start
with “CONNECTING YOUR COOLBOT PRO TO YOUR WI-FI NETWORK” (page 2), and then move to the “CONNECTING YOUR
COOLBOT PRO TO YOUR AIR CONDITIONER” Section of this Guide (page 3).
• I have a Mini-Split A/C! Please visit our library at www.storeitcold.com/support-library for a detailed Installation Guide on
compatible Mini-Split air conditioners.
Qty
Item
Description
1
CoolBot Pro
Patented Digital Temperature Controller
1
CoolBot Jumper
Wi-Fi Radio Signal Module
2
Temperature Sensors
Sensor Cables (Blue Cable - Black Tip) with external 2.5mm jack connector
1
Heater
CoolBot Heater Cable (Black Cable - Red Tip) with external 2.5mm jack connector
1
Data Cable
Data Transfer Cable (Silver or Grey) with RJ11 connector on both ends
1
Power Supply
Mini-USB port connector cable. Input: 110V-240V / Output: 5V, 1Amp
Classification
Temperature Regulating and Indicating Equipment
UL File Number
E500290
Rated
5V DC, SELV, <15W, Class 2
Action Type
Type 1
Purpose
Operating Control
Software Class
Class A
Control Construction
Independently Mounted for Surface Mounting
Pollution Degree
2
Power Supply
For use with Phihong PSAC05A-050L6 power supply
Rated Impulse Voltage
330V
Temperature Sensors
Heater
Power Supply
Data Cable

Store It Cold CoolBot PRO Specifications

General

Control Type	Digital
Connectivity	Wi-Fi
Display	LCD
Product Type	Temperature Controller
Compatibility	Compatible with most standard air conditioners
Mobile App	Yes, available for iOS and Android