1 | P a g e
CoolBot Pro Quick Start Set Up Guide Rev 2021 – 01A UL ©2021 Store It Cold, LLC
BOX CONTENTS
TECHNICAL DATA
BEFORE STARTING
• Do you have a compatible air conditioner? For a list of compatible A/Cs visit: www.storeitcold.com/support-library/
• Mini Split A/Cs. Skip this step-by-step guide. Detailed Mini Split-CoolBot Installation Guide available at:
www.storeitcold.com/support-library/
• Important. Follow this step-by-step guide entirely to ensure proper installation of the CoolBot Pro to the air conditioner.
Complete CoolBot Pro Instruction Manual available at our CoolBot Info section at: www.storeitcold.com/support-library/
• No Wi-Fi? Or don’t want to use the Wi-Fi feature? Go straight to page 3. You can use the CoolBot Pro just like previous
generation CoolBots without connecting the CoolBot Jumper. NOTE: The CoolBot Pro will keep your cooler cold but you won’t be
able to access online data or change CoolBot Pro settings directly from the App.
• Using with Wi-Fi? Start on page 2. Connect only to a secured 2.4GHz Wi-Fi Network (5GHz is not supported).
• Installation Video. Watch our CoolBot Pro installation video at: www.storeitcold.com/build-it/install-your-coolbot/
Patented Digital Temperature Controller
Wi-Fi Radio Signal Module
Sensor Cables (Blue Cable - Black Tip) with external 2.5mm jack connector
CoolBot Heater Cable (Black Cable - Red Tip) with external 2.5mm jack connector
Data Transfer Cable (Silver or Grey) with RJ11 connector on both ends
Mini-USB port connector cable. Input: 110V-240V / Output: 5VDC, 1Amp
Temperature Regulating and Indicating Equipment
5V DC, SELV, <15W, Class 2
Independently Mounted for Surface Mounting
For use with Phihong PSAC05A-050L6 power supply
To Next Page
Need help?
General
