Store It Cold CoolBot - Shipping and Warranty Information

STORE IT COLD, LLC 3879 TENNYSON ST. DENVER, CO 80212
• Adjust the Heating Differential HD value on the INKBIRD to 2°F/1°C following the
instructions on the INKBIRD manual.
• If all settings are correct you should be reading on your INKBIRD:
1. PV: A value within approximately 1°F degree of the CoolBot display
2. SV: 34°F (if set to display in Fahrenheit scale)
3. 2°F (if set to display in Fahrenheit scale) when pressing the UP arrow
(heating differential set value)