SUPPORT@STOREITCOLD.COM
2020 © Store It Cold, LLC. 17 Rev 2020-8A. All Rights Reserved.
SECURING DOOR THRESHOLD TO THE FLOOR
ONLY for coolers with an insulated floor. Coolers with NO floor will NOT have a threshold
Across the bottom of each door opening is a stainless-steel threshold.
Secure the threshold by using self-drilling metal screws and by screwing them into the floor panel
(illustration 1).
Some thresholds may overhang in a 90° angle to the front. Ensure you fasten that side as well to the
front side of the floor panel (illustration 2).
To Next Page
Loading...
