SUPPORT@STOREITCOLD.COM
2020 © Store It Cold, LLC. 30 Rev 2020-8A. All Rights Reserved.
7. Slide the unit inside the cabinet.
8. Do not install the front cover of the A/C at this point.
9. Use the foam strips provided with your A/C unit to fill the gaps on the wall in between the
A/C opening and the cabinet.
TIP
If you experience condensation around the A/C inside the cooler, a better alternative to the
foam strips included with the A/C, is to use closed-cell pipe insulation available at hardware
stores (looks like black a pool noodle) and cut it in 2 strips longways. Insert the strips into
the gaps all around the opening and the A/C to seal the space. Repeat on the outside.
DO NOT USE SPRAY FOAM TO SEAL IN BETWEEN THE A/C ENCLOSURE
AND THE WALL
DO NOT USE THE FILTER OF THE A/C
PLEAE REMOVE FILTER WHEN INSTALLING THE FRONT PANEL OF THE A/C UNIT
To Next Page
Loading...
