Store It Cold CoolBot - Page 33

SUPPORT@STOREITCOLD.COM
2020 © Store It Cold, LLC. 33 Rev 2020-8A. All Rights Reserved.
COOLERS WITH ONE 18K BTUs AIR CONDITIONER
A dedicated 208/240V 15-amp circuit required
A dedicated 120V 15-amp circuit required
• The electrician will have to install:
o One 208/240V surface mount outlet box to plug in the A/C, inside the cooler - on the
right side of the A/C.
o One 120V surface mount outlet box to plug in the CoolBot Controller, inside the cooler
- on the right side of the A/C.
o One 120V supply via conduit to the front light atop the door to provide power to the
light and the factory pre-wired light switch (see page 34).
• A/C plug configuration (18K BTU):
COOLERS WITH ONE 24K BTUs AIR CONDITIONER
A dedicated 208/240V 20-amp circuit required
A dedicated 120V 15-amp circuit required
• The electrician will have to install:
o One 208/240V surface mount outlet box to plug in the A/C, inside the cooler - on the
right side of the A/C.
o One 120V surface mount outlet box to plug in the CoolBot Controller, inside the cooler
- on the right side of the A/C.
o One 120V supply via conduit to the front light atop the door to provide power to the
light and the factory pre-wired light switch (see page 34).
• A/C plug configuration (24K BTU):