EasyManuals Logo

StoreYourBoard BLAT TOOL RACK User Manual

StoreYourBoard BLAT TOOL RACK
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
IMPORTANT INFORMATION
WARNING! The BLAT Tool Rack is NOT intended for use by any person under the age of 18
years old. You must be over the age of 18 to install or use the BLAT Tool Rack.
WARNING! Strictly follow all instructions to avoid an accident, damage to property,
personal injury or death.
WARNING! Do not use this product for human suspension. Components can fail causing
person to fall, possibly resulting in serious injury or death.
WARNING! When operating system, make sure the area below object is clear of persons. If
object comes down too quickly, this can cause an accident.
READ THE ENTIRE USER MANUAL BEFORE INSTALLATION
The User Manual you received with your BLAT Tool Rack provides instructions on how to install
and use your BLAT Tool Rack. The instructions are written for a person with a basic
understanding of tools and procedures. Read the entire manual before proceeding. If you do
not understand any portion of the instructions, do not attempt installation, and call
1-877-880-5934.
CORRECTLY INSTALL THE PRODUCT
Read and follow all instructions carefully.
Failure to properly install and use the BLAT Tool Rack could allow the product to detach from
the wall, injuring persons or personal property in the process. Accordingly, it is critical that the
BLAT Tool Rack be installed correctly and according to the instructions in the User Manual.
USE TOOLS SAFELY
The procedures in the User Manual may require climbing ladders and/or operating power tools.
Make sure you are familiar with these tools and their safety procedures before attempting to
use such tools during installation. Always be aware of electrical wires during installation. Failure
to do so could result in an electrical shock or death.
WARNING!
Contact with wires can give you a severe electrical shock, which may cause injury or death. If you
do not know where wires are, have the work done by an experienced professional.
BLAT Tool Rack
Manufactured for Spire LLC by Tellbe in Vietnam
Quantity: 1
IMPORTANT INFORMATION
CAUTION
It is the consumer’s responsibility to install this system in accordance with all codes, ordinances,
and local regulations.
When installing the BLAT Tool Rack, it is the consumer’s responsibility to ensure the structural
integrity of the structure it is being mounted to.
The BLAT Tool Rack is intended for the storage of tools only. Do not use it for any other
purpose.
This system has a maximum capacity of 325 lbs. Overloading the system could result in damage
to property or injury.
Use extreme caution when loading and unloading equipment from this system.
It is the consumer’s responsibility to ensure that the system is in proper working condition
before loading objects onto the system. Check tightness of all bolts and screws periodically.
Failure to properly maintain the system could result in damage to property or injury.
WARNING AND DISCLAIMER
Spire LLC (d/b/a StoreYourBoard) expressly disclaims any and all liability for personal injury,
property damage or loss, whether direct, indirect, incidental, resulting from the incorrect
mounting, improper use, inadequate maintenance, or neglect of this system.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the StoreYourBoard BLAT TOOL RACK and is the answer not in the manual?

StoreYourBoard BLAT TOOL RACK Specifications

General IconGeneral
BrandStoreYourBoard
ModelBLAT TOOL RACK
CategoryRacks & Stands
LanguageEnglish

Related product manuals