Need help?Do you have a question about the Storz CALCULASE and is the answer not in the manual?
General| Laser Type | Holmium:YAG |
|---|---|
| Wavelength | 2100 nm |
| Pulse Frequency | 5 - 20 Hz |
| Application | Lithotripsy |
| Fiber Diameter | 200 - 1000 μm |
| Electrical Requirements | 100-240 VAC, 50/60 Hz |
| Cooling | Water |
Overview of the CALCULASE unit and fundamental laser principles.
Explains the meaning of warnings, cautions, and notes for safe operation.
Details essential safety features like keyswitch, emergency stop, and remote interlock.
Covers system fault detection, error messages, and potential interference from other equipment.
Guides on unpacking, setting up the unit, and connecting/handling the laser fiber.
Explains operating modes, setting ranges, and fiber management procedures.
Information on essential laser protective eyewear for user and patient safety.
Instructions for cleaning and maintaining the device's exterior surfaces.
Outlines repair procedures, warranty terms, and responsible disposal of the equipment.
Guide to identifying and resolving system faults and error messages.
Lists technical specifications, standard compliance, and directive conformity.
Provides guidelines and precautions for electromagnetic compatibility during use.
List of KARL STORZ subsidiaries and contact information worldwide.
To Next Page