3
User’s Guidelines
The STOTT PILATES Reformer is a sophisticated
piece of equipment that, when used properly,
can facilitate many Pilates exercises safely and
effectively. However, care and caution must be
taken as there are some inherent dangers when
using any exercise equipment – especially
when spring resistance is involved.
For inexperienced or first-time users,
the STOTT PILATES Reformer should only
be used under the supervision of
a trained professional.
This manual includes general guidelines for setup
and usage. To get the most out of your Reformer,
STOTT PILATES offers a full range of instructional
DVDs and manuals. Personalized training is offered
through our Licensed and Corporate Training Centers.
For more information, visit merrithew.com.
For questions or technical assistance, please email
equipment@merrithew.com.
IMPORTANT!
This manual contains important assembly, safety
and warranty information. Read the manual carefully
before using your new STOTT PILATES Reformer
and keep the manual handy for future reference.
UNSAFE OR IMPROPER USE OF THIS EQUIPMENT
BY FAILING TO READ AND COMPLY WITH ALL
REQUIREMENTS AND WARNINGS COULD RESULT
IN SERIOUS INJURY.
It is impossible to predict every situation and
condition which can occur while using your Reformer.
Merrithew Health & Fitness
™
makes no representation
about the safe use of the Reformer under all conditions.
There are risks associated with the use of any exercise
equipment which cannot be predicted or avoided,
and you assume the responsibility for that risk.
Merrithew Health & Fitness recommends cautious
assembly and usage and wishes you many hours of
safe and effective exercise.
Safety Check
Proper maintenance and timely replacement of your
equipment or component parts is your responsibility.
Conduct a regular weekly inspection of the following:
◗ Replace springs every 24 months, or as needed
within that period if deformation occurs.
◗ Check wear on single, locking and double-ended
spring clips and replace every 12 months.
◗ Ensure footbar is securely fastened.
◗ Ensure swing arm support is securely fastened.
◗ Ensure carriage stopper is fully inserted in one
of the six positions at all times.
◗ Ensure all nylon locknuts and spring bolts are
securely fastened.
◗ Check wear on all star knob threads, replace as needed.
◗ Check wear on ropes, straps and spring clips,
replace as needed with 12 month period.
◗ Ensure shoulder rests are inserted completely.
◗ Check that nylon locknuts, spring bolts and
spring balls are securely fastened.
◗ Inspect the retractable rope system to confirm the
ropes are in position and the threaded bolts of the
cleats and pulley blocks are secure (if applicable).
◗ Check that all hex bolts on the Reformer’s two
vertical frame receptacles are tight and that the
vertical frame is securely anchored (if applicable).
Refer to the assembly section in this manual for
initial assembly instructions and part labeling.
REPLACE ALL SPRINGS EVERY 24 MONTHS AND SPRING
CLIPS EVERY 12 MONTHS OR AS NEEDED WITHIN THAT
PERIOD. FAILURE TO PERFORM RECOMMENDED SAFETY
CHECKS, OR USING THE MACHINE WITH IMPROPERLY
ADJUSTED, BROKEN OR WORN PARTS COULD RESULT
IN SERIOUS BODILY INJURY.
Care & Cleaning
Wipe vinyl surfaces with a mixture of water and tea
tree oil, a natural disinfectant. Add 1tsp of tea tree oil
to a 1L or 1qt spray bottle of water. A mixture of mild
soap and water may be used to remove more persistent
dirt. Ensure cleaner does not leave an oily residue,
or make surfaces slippery.
Clean c-channels and rollers weekly with a damp cloth.
Avoid spraying liquid directly onto surfaces.
CAUTION: Never use oil lubricants as they
may damage rollers.
To Next Page
Loading...