Before cleaning or maintenance,
switch off the electricity supply.
Replacing a light bulb
1. Switch off the electricity supply.
2. Remove the lamp cover by turning
it anticlockwise.
3. Remove the 40W light bulb - by
moving it in the direction of the
arrow.
4. Replace it with a new 40W light
bulb (taking care to avoid skin
contact with the bulb glass).
5. Replace the lamp cover, turning
clockwise to secure.
Outer casing
All external parts of the outer casing
can be safely cleaned with a c l e a n
cloth wrung out in hot soapy water.
Do not use caustic pastes, abrasive
cleaning powders, wire wool, hard
implements, or any products containing
chlorides as they will damage the
surfaces.
Stubborn marks can be removed using
a stainless steel cleaner. We recom-
mend that you clean the whole of the
stainless steel area to maintain a uni-
form finish.
Sharp objects can mark the surface of
stainless steel, but marks will become
less noticeable with time.
To maintain the finish of the stainless
steel, or to remove any greasy marks,
wipe the stainless steel surface sparingly
with a minimum amount of Baby Oil
and kitchen paper.
Do not use cooking oils, as these may
contain salt, which can damage the
stainless steel surface.
4
Care & Cleaning
To Next Page
Loading...
