USING THE HOB
and the display is switched off again.
Using the timer selection key again (as
longasnovaluewasset)thenextactive
cooking zone can be selected.
Setting a timer value
•Bypressingthetimerkeys,atimer
value can be set. If the timer-plus-key is
pressedrstthedisplaystartswith1min
and can be increased in 1min steps. If the
timer-minus-keyispressedrstthetimer
starts with 15 min and can be decreased
in 1 min steps.
•Pressingthekeypermanentlyspeedsup
the timer adjustment. The speed will also
increase while the key is held. (the time
betweentwotimestepsreduces).
•Ifatimerhasexpiredthetimeralarmis
activated and the assigned cooking zone is
immediately switched off.
•Thecookingzonedisplayshows0orH.
If no user input stops the alarm
signal it will be on for maximum 2
minutes.
The alarm can be deactivated
by switching off the control
using the main switch or by
pressing the two timer keys or it will be
deactivated automatically after 2 minutes.
Switching off a timer or changing the
time setting
Thetimervaluecanbemodiedatany
time by selecting the timer and then by
pressingthe(+or-)timerkey.
To stop an active timer the value can be
set to 0. Pressing Plus and Minus simul-
taneously for 2 seconds also resets the
timer value to 0.00.
Minute Minder
The minute minder buzzes when the time
set has expired. It does not switch off any
zone.
To operate:
1)Turnonthehob,usingtheon/offkey.
2)Selectthetimerbypressingthe+and
- keys together (do not activate any cook
zone).
3)Settherighthanddigitupto9minutes
(SingleMinutesUnits)andwaitacouple
of seconds.
4)Thedisplaywillnowindicateforyouto
set the left hand digit, up to 90 minutes
(10MinuteUnits).
5)Thetimerisnowsetandbeginscount-
ing down. (No zone indicator light should
beset).
6)Youcannowusethehobasnormal.
When the time is up.
1)Thecorrespondingindicatorinthe
timerdisplaywillash,thetimerwillbeep.
2)Touchanycontroltostopthebeeping.
Warning!
Never leave the hob unattended when in
use, even when you have set the timer to
turn off the cook zone.
Additional timer information
To modify or cancel a timer setting follow
steps1)to5)above.
To set the timer for additional zones follow
steps1)to5)above.
If multiple zones have been set for timed
operation , the timer display will always
display the time for the cook zone with
the shortest time remaining.
To check the timer setting for a different
cook zone, simply select the required cook
zone,theremainingtimewillbrieyap-
pear in the timer display.