15
Pans unsuitable for Induction:
Pans made of copper, stainless steel, aluminium, oven
proof glass, wood, ceramic and terracotta.
Energy Saving Tips
4
It’s important that good quality flat
bottomed pans are used.
4
Always ensure that pan bases are dry
before using them on the hob.
4
Always place cookware on the cooking
zone before it is switched on. When ever
possible place lids on pans.
4
If a pan creates a large air gap over the
middle of the cooking zone, the accuracy
of the temperature sensing can be
affected.
HOB OVERVIEW
Function Description Symbol
Power Level
Once a cook zone is selected, a power level can be set to a
low or high temperature.
Cook zone timer
Once a cook zone is selected, the cook zone timer can be
activated to sound after a pre-determined amount of time.
When the alarm sounds and the dot begins to flash, the
cook zone will turn o.
Residual Heat
After use, the cooking surface remains hot and the residual
heat symbol will be displayed.
Pan detection
If no pan or an unsuitable pan is detected on an activated
cook zone, the pan detection symbol will be displayed.
Suitable pans - cast iron, metals with magnetic properties.
Non-suitable pans - copper, stainless steel, aluminium, glass,
ceramic, terra-cotta.
Booster function
The booster function temporarily increases the power
to a cook zone allowing for a faster heat up time. It will
deactivate automatically after 5 minutes on the rear and
centre cook zones or if a lower power level is selected.
Child lock
Child lock can be activated to stop the hob from being
accidentally turned on.
To Next Page
Loading...
