Operations Model 6DS-SP Planarizer
3 - 22 Version 4.0 - February 1998
MENU SELECTION
The F9 key will display "Select Menu" any time a menu is showing.
Pressing the F9 key will cause the menu area to go blank and present a
selection of eight menus and an "OTHER" choice. The "OTHER" choice
will show an alternate list of menus. Both menu selection groups are shown
in Figure 3-4.
Once a menu is selected, it will be displayed along with appropriate function
key choices for that menu.
All menus can be selected (at least for viewing) in all password levels.
New Feature at All Menus - “Menu “Hopping”
Menu "hopping" (menu changing) is permitted while the machine is
operating. While all menus are always accessible, some function key
choices may be "ghosted" if the choices would conflict with the current
machine operation. (There is no longer any "Main Menu".)
Menu "hopping" permits viewing setups, viewing diagnostics, and making
some "on the fly" changes concurrent with machine operation.
To Next Page
Loading...
